Bronson TI 3000

The Bronson TI 3000 is a heavy-duty toroidal step-up and step-down voltage converter — built for the most demanding US and EU appliances.

Max. 3000W / Continuous 2400W — table saws, compressors, larger AC units, electric dryers and commercial kitchen equipment
Converts both ways — 110V to 230V and 230V to 110V
Universal output — EU (Schuko), UK (Type G) and 2× US (Type B) sockets — two American appliances in parallel, no multi-adapter
Automatic polarity correction — L and N always on the correct output pin, regardless of how the Schuko plug is inserted. A feature you won't find on standard converters, critical for audio, medical and vintage US equipment
98% efficiency — toroidal core handles long continuous loads with minimal heat and noise
Ideal for — expats, professional workshops and businesses running large US/EU appliances permanently

Condition
- NEW
- USED

166.38 € 198.00 €

Excl. Shipping
Shipping: 10-20 Business days
30-Day Money-Back Guarantee

Add to cart Buy now

Quantity:

Frequently asked questions

Does the TI 3000 work both ways — step-up and step-down?

Yes, it's fully bidirectional. You can use it to run 110V US devices on European 230V mains (step-down), or to power 230V European devices from a 110V supply (step-up).

Will the TI 3000 work with my device's motor or compressor?

Yes, the built-in soft start circuit protects both the transformer and your equipment from inrush current spikes. As long as your device's running wattage stays within the TI 3000's 2400W continuous rating, it will operate reliably. If unsure, check your device's label for both starting and running wattage.

Our technology.

Toroidal-Core Construction, 98% Efficiency

Inside the TI 3000 is a toroidal transformer core — copper windings wrapped around a closed magnetic ring. The topology reduces stray losses and keeps mechanical hum low under load, with measured efficiency at 98%.

The output remains a stable sine wave suitable for audio equipment, laboratory instruments, motors, and other waveform-sensitive devices. Under continuous operation, the enclosure also runs cooler than many conventional transformer designs of similar size.

Resettable breaker, no fuse swapping.

Overload protection is handled by a resettable circuit breaker mounted directly on the unit rather than a replaceable glass fuse. If the load exceeds the rated limit, the breaker trips mechanically and can be reset by hand once the fault condition is cleared.

No fuse replacement, service visit, or enclosure disassembly is required. For temporary overloads or startup surges from high-inrush appliances, the unit can be returned to operation immediately after reset.

	TI 200 200W	TI 300 300W	TI 500 500W	TI 800 800W	TI 1000 1000W	TI 1500 1500W	TI 2000 2000W	TI 3000 3000W
Continuous power	160W	240W	400W	640W	800W	1200W	1600W	2400W
Input voltage	100–120V or 200–240V AC
Output voltage	100–120V or 200–240V AC
Output sockets	US Type B (110V) · Schuko F (230V) · UK Type G (230V)							2× US Type B (110V) · Schuko F (230V) · UK Type G (230V)
Overcurrent protection	Fuse 2A/2A	Fuse 3A/2A	Fuse 5A/3A	Breaker 7A/3A	Breaker 8A/4A	Breaker 12A/7A	Breaker 15A/8A	Breaker 15A/12A
Soft start	—	—	—	—	—	Yes	Yes	Yes
Overheat protection	—	—	—	—	—	—	—	Yes
Dimensions (H×L×W cm)	10×20.6×19.2	9×15.8×12.5	9×15.8×12.5	13×19.2×14.8	13×19.2×14.8	13.8×21.8×16.8	13.8×21.8×16.8	15×27×21
Weight	4.7 kg	2.2 kg	2.8 kg	3.6 kg	4.3 kg	5.6 kg	6.5 kg	8.9 kg