Bronson TI 200

The Bronson TI 200 is a compact toroidal step-up and step-down voltage converter — perfect for safely using American, British or European appliances anywhere in the world.

Max. 200W / Continuous 160W — suitable for small appliances like music instruments, radios, clocks and LED lamps
Converts both ways — 110V to 230V and 230V to 110V
Universal output — EU (Schuko), UK (Type G) and US (Type B) sockets included
98% efficiency — toroidal core keeps energy loss and noise to a minimum
Ideal for — expats, travelers and anyone running foreign appliances at home

Plug Type
- EU
- UK
Condition
- NEW
- USED

43.70 € 52.00 €

Excl. Shipping
Shipping: 10-20 Business days
30-Day Money-Back Guarantee

Add to cart Buy now

Quantity:

Out of Stock

Get notified when back in stock

Not sure what converter to buy?

Answer 3 questions and get a model recommendation, instantly.

Find the right converter →

Bronson TI 200 — Voltage Transformer 110V↔︎230V

For travelers and expats running small US devices. The TI 200 steps voltage up and down between 110V and 230V — 160W continuous, 200W maximum.

200W Max, 160W Continuous — Low-draw devices.

The TI 200 delivers 200W maximum power for up to 15 minutes and 160W continuously. It suits audio equipment, media players and low-draw travel devices.

Bidirectional 110V↔︎230V — Step-up and step-down.

Set the input switch to match your local voltage and the TI 200 converts 110V to 230V and 230V to 110V. It runs US devices on European power and European devices on US power.

EU, UK and US Sockets — No travel adapter.

The front panel carries one EU Schuko, one UK Type G and one US Type B outlet. It connects devices from different regions directly, without a separate travel adapter.

Use case 01

Home Studio

US synthesizer running on 230V European power.

Use case 02

Travel Devices

US hair clipper running on European power.

Use case 03

Collectors & Hi-Fi

Vintage US radio tuner running in the EU.

Frequently asked questions

Can I use the Bronson TI 200 as a voltage transformer for US audio gear?

Yes — 100W-class audio devices sit within the TI 200's 160W continuous rating.

A 100W Fender practice amp or small studio monitors run with headroom; the toroidal core delivers a clean sine wave with low mechanical hum. For amplifiers above roughly 130W, the TI 300 or TI 500 give more reserve.

Is the Bronson TI 200 galvanically isolated?

No — the TI 200 is an autotransformer without galvanic isolation.

Primary and secondary share one winding, so there is no isolated ground path. If you need galvanic isolation for bench or measurement work, the MII or TT line is built for that.

Do I need to set the input voltage on the TI 200 manually?

Yes — set the input switch to match your local voltage (110V or 230V) before connecting a device.

The TI 200 is bidirectional: with the switch set correctly it steps 110V up to 230V or 230V down to 110V.

Can I replace the TI 200's fuse myself?

Yes — the fuse holder is accessible from outside and four spare fuses are included.

The TI 200 uses a 2A fuse. If the load exceeds the limit, the fuse cuts power silently — the device simply stops. Check the fuse first before other troubleshooting.

Our technology.

Toroidal Core, 98% Efficiency

Inside the TI 200, a toroidal transformer winds its copper coils around a closed magnetic ring and reaches a measured efficiency of 98% while keeping the core compact. That cuts stray losses and keeps mechanical hum low under load; the housing stays cooler in continuous use, and the output delivers a stable sine wave for audio equipment and lab instruments.

On-Board Fuse Plus Four Spare Fuses

A 2A fuse sits on the output side of the TI 200, held in a fuse holder you can reach from outside, and the unit ships with four matching spare fuses in the box. When the load passes the limit, the fuse cuts the current before it reaches your device. Replacement takes seconds and needs no workshop.

	TI 200 200W	TI 300 300W	TI 500 500W	TI 800 800W	TI 1000 1000W	TI 1500 1500W	TI 2000 2000W	TI 3000 3000W
Continuous power	160W	240W	400W	640W	800W	1200W	1600W	2400W
Input voltage	100–120V or 200–240V AC
Output voltage	100–120V or 200–240V AC
Output sockets	US Type B (110V) · Schuko F (230V) · UK Type G (230V)							2× US Type B (110V) · Schuko F (230V) · UK Type G (230V)
Overcurrent protection	Fuse 2A/2A	Fuse 3A/2A	Fuse 5A/3A	Breaker 7A/3A	Breaker 8A/4A	Breaker 12A/7A	Breaker 15A/8A	Breaker 15A/12A
Soft start	—	—	—	—	—	Yes	Yes	Yes
Overheat protection	—	—	—	—	—	—	—	Yes
Dimensions (H×L×W cm)	10×20.6×19.2	9×15.8×12.5	9×15.8×12.5	13×19.2×14.8	13×19.2×14.8	13.8×21.8×16.8	13.8×21.8×16.8	15×27×21
Weight	4.7 kg	2.2 kg	2.8 kg	3.6 kg	4.3 kg	5.6 kg	6.5 kg	8.9 kg